Rohde & Schwarz GB4000V, User Manual

Page: 16 / 70

R&S GB4000V Audio Unit
User Manual 6174.7514.02 - 02 14
2 Getting Started
2.1 Unpacking and Checking
1. Check the packaging for damage.
2. Unpack the delivered goods.
3. Check the delivered goods (including accessories) against the delivery note.
4. Check the delivered goods for signs of transport damage.
5. Contact the shipping agent immediately, if damage is found.
Keep the packing material for re-use e.g. if the unit is to be sent to the nearest
Rohde & Schwarz representative (refer to www.rohde-schwarz.com) for service.
2.2 Packing, Transport and Storage
Prior to any transport carry out the following steps:
1. Use the original package (box, etc.) and packaging material, if possible, to prevent
mechanical and electrical damage. Make sure that the stability of the packaging is
adequate to the contents.
2. Put the unit in the plastic bag (protection against moisture and dust).
3. Put the unit in the package by using the packaging material. Avoid direct lateral
contact between unit and packaging.
4. Seal the package.
5. Affix a HANDLE WITH CARE label on the package.
6. Remove the old address and shipment labels from the package and affix the new
ones.