manualshive.com logo in svg

Rohde & Schwarz FSW13, User Manual

Share
Download
Rohde & Schwarz FSW13 User Manual Download Page 95

Getting Started

R&S

®

FSW

95

User Manual 1173.9411.02 ─ 19

3.4.7.1

Using the LXI Browser Interface in a LAN

LAN eXtensions for Instrumentation (LXI) is an instrumentation platform for measuring
instruments and test systems that is based on standard Ethernet technology. LXI is
intended to be the LAN-based successor to GPIB, combining the advantages of Ether-
net with the simplicity and familiarity of GPIB. The LXI browser interface allows for
easy configuration of the LAN.

Restrictions

Only user accounts with administrator rights can make use of the LXI functionality. For
details see 

chapter 3.1.2.3, "Login"

, 

on page 28.

3.4.7.2

Remote Desktop Connection

Remote Desktop is a Windows application which can be used to access and control
the instrument from a remote computer through a LAN connection. While the instru-
ment is in operation, the instrument screen contents are displayed on the remote com-
puter, and Remote Desktop provides access to all of the applications, files, and net-
work resources of the instrument. Thus, remote operation of the instrument is possible.

With Windows

 

7, Remote Desktop Client is part of the operating system. For other ver-

sions of Windows, Microsoft offers the Remote Desktop Client as an add-on.

3.4.7.3

Connecting a PC via the GPIB Interface

A GPIB interface is integrated on the rear panel of the instrument. You can set the
GPIB address and the ID response string. The GPIB language is set as SCPI by
default but can be changed to emulate other instruments. By connecting a PC to the
R&S

 

FSW via the GPIB connection you can send remote commands to control and

operate the instrument.

 

 

 

Operating the Instrument

Summary of Contents for FSW13































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands