Rohde & Schwarz FSW13, User Manual

Page: 936 / 1150

Remote Commands
R&S
®
FSW
936 User Manual 1173.9411.02 ─ 19
Example: CALC:MARK:X:SLIM ON
Switches the search limit function on.
CALC:MARK:X:SLIM:RIGH 20MHz
Sets the right limit of the search range to 20 MHz.
Manual operation: See "Search Limits (Left / Right)" on page 192
See "Left Limit / Right Limit" on page 268
CALCulate:MARKer:X:SLIMits:ZOOM[:STATe] <State>
This command adjusts the marker search range to the zoom area.
Parameters:
<State> ON | OFF
*RST:
OFF
Example:
CALC:MARK:X:SLIM:ZOOM ON
Switches the search limit function on.
CALC:MARK:X:SLIM:RIGH 20MHz
Sets the right limit of the search range to 20 MHz.
Manual operation: See "Using Zoom Limits" on page 501
CALCulate:THReshold <Level>
This command defines a threshold level for the marker peak search.
Parameters:
<Level> Numeric value. The value range and unit are variable.
*RST:
-120 dBm
Example: CALC:THR -82DBM
Sets the threshold value to -82 dBm.
Manual operation: See "Search Threshold" on page 501
CALCulate:THReshold:STATe <State>
This command turns a threshold for the marker peak search on and off.
Parameters:
<State> ON | OFF
*RST:
OFF
Example: CALC:THR:STAT ON
Switches on the threshold line.
Manual operation: See "Deactivating All Search Limits" on page 192
Analyzing Measurements (Basics)