Remote Commands
R&S
®
FSW
824
User Manual 1173.9411.02 ─ 19
Example:
LAY:CAT?
Result:
'2',2,'1',1
Two windows are displayed, named '2' (at the top or left), and '1'
(at the bottom or right).
Usage:
Query only
LAYout:IDENtify[:WINDow]?
<WindowName>
This command queries the
index
of a particular display window.
Note
: to query the
name
of a particular window, use the
query.
Query parameters:
<WindowName>
String containing the name of a window.
Return values:
<WindowIndex>
Index number of the window.
Usage:
Query only
LAYout:REMove[:WINDow]
<WindowName>
This command removes a window from the display.
Parameters:
<WindowName>
String containing the name of the window.
In the default state, the name of the window is its index.
Usage:
Event
LAYout:REPLace[:WINDow]
<WindowName>,<WindowType>
This command replaces the window type (for example from "Diagram" to "Result Sum-
mary") of an already existing window while keeping its position, index and window
name.
To add a new window, use the
Parameters:
<WindowName>
String containing the name of the existing window.
By default, the name of a window is the same as its index. To
determine the name and index of all active windows, use the
<WindowType>
Type of result display you want to use in the existing window.
See
on page 822 for a list of availa-
ble window types.
Example:
LAY:REPL:WIND '1',MTAB
Replaces the result display in window 1 with a marker table.
Configuring the Result Display
