manualshive.com logo in svg

Rohde & Schwarz FSW13, User Manual

Share
Download
Rohde & Schwarz FSW13 User Manual Download Page 598

General Instrument Setup

R&S

®

FSW

598

User Manual 1173.9411.02 ─ 19

Print colors

Defines the color settings used for printout. In addition to the predefined settings, a
user-defined color set can be configured.

If "Show Print Colors on Display" is activated, the currently selected print colors are
displayed as a preview for your selection.

Optimized Colors

Selects an optimized color setting for the printout to improve the visi-
bility of the colors (default setting). Trace 1 is blue, trace 2 black,
trace 3 green, and the markers are turquoise. The background is
always printed in white and the grid in black.

Screen Colors (Print)

Selects the current screen colors for the printout. The background is
always printed in white and the grid in black.

Screen Colors (Hardcopy)

Selects the current screen colors without any changes for a hard-
copy.

User Defined Colors

Selects the user-defined color setting.

Remote command: 

HCOPy:

​

CMAP<item>:

​

DEFault<colors>

​

 

on page 1006

Showing Print Colors on Display

Temporarily shows the currently selected print colors on the screen display. This func-
tion can be used as a preview for printing.

Modifying User-Defined Color Assignments

You can configure the colors used to display and print individual screen objects
according to your specific requirements.

The colors are configured in the (identical) "Screen Color Setup"/"Printer Color Setup"
dialog boxes.

Display Settings

Summary of Contents for FSW13































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands