
Common Measurement Settings
R&S
®
FSW
324
User Manual 1173.9411.02 ─ 19
The "Gate Mode"
Level
is not supported for R&S power sensors. The signal sent by
these sensors merely reflects the instant the level is first exceeded, rather than a time
period. However, only time periods can be used for gating in level mode. Thus, the trig-
ger impulse from the sensors is not long enough for a fully gated measurement; the
measurement cannot be completed. For details on gating see
For details see
"How to Configure a Power Sensor as an External (PSE) Trigger"
6.2.3.2
Power Sensor Settings
Power sensor settings are available in the "Power Sensor" tab of the "Input" dialog
box. Each sensor is configured on a separate tab.
........................................................................................... 325
................................................................................................ 325
Setting the Reference Level from the Measurement (Meas->Ref)
..............................327
Average Count (Number of Readings)
........................................................................327
Using the power sensor as an external trigger
............................................................327
Data Input and Output