Rohde & Schwarz FSW13, User Manual

Page: 229 / 1150

Measurements
R&S
®
FSW
229 User Manual 1173.9411.02 ─ 19
How to load an SEM settings file
1. From the file selection dialog box, select the settings file (with an ".xml" extension).
2. Select the "Load" button.
The settings from the selected file are restored to the R&S FSW and you can
repeat the SEM measurement with the stored settings.
How to save a user-defined SEM settings file
1. Configure the SEM measurement as required (see chapter 5.6.6, "How to Perform
a Spectrum Emission Mask Measurement" , on page 225).
2. In the "Standard Files" tab of the "Spectrum Emission Mask" dialog box, define a
file name and storage location for the settings file.
3. Select the "Save" button.
The settings are stored to a file with the extension ".xml" as specified.
How to delete an SEM settings file
1. In the "Standard Files" tab of the "Spectrum Emission Mask" dialog box, select the
file you want to delete.
2. Select the "Delete" button.
3. Confirm the message.
The settings file is removed from the R&S FSW.
How to restore default SEM settings files
The R&S FSW is delivered with predefined settings files which can be edited and over-
written. However, you can restore the original files.
► In the "Standard Files" tab of the "Spectrum Emission Mask" dialog box, select the
"Restore Standard Files" button.
The original predefined settings files are available for selection on the R&S FSW.
5.6.6.2 How to Save SEM Result Files
The Result Summary from an SEM measurement can be saved to a file, which can be
exported to another application for further analysis, for example.
For details on the file format of the SEM export file, see chapter 5.6.8.2, "ASCII File
Export Format (Spectrum Emission Mask)" , on page 237.
1. Configure and perform an SEM measurement as described in chapter 5.6.6, "How
to Perform a Spectrum Emission Mask Measurement" , on page 225.
2. In the "Overview", select the "Analysis" button.
Spectrum Emission Mask (SEM) Measurement