Rohde & Schwarz FSV3000, User Manual

Page: 937 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
937 User Manual 1178.8520.02 ─ 08
Unlike manual operation, you can define an absolute limit anytime and regardless of
the limit check mode.
Suffix:
<sb>
.
1 to 8
<ri> 1..n
Selects the measurement range.
<li> 1..n
Power class for which the limit is defined.
Parameters:
<Level> Absolute limit at the start frequency of a SEM range.
Range:
-400 to 400
*RST: -13
Default unit: dBm
Example: SENSe:ESPectrum:RANGe:LIMit:ABSolute:STARt -10
For a detailed example see Chapter 12.5.6.11, "Example: SEM
measurement" , on page 959.
Manual operation: See "Abs Limit Start / Stop <n>" on page 244
[SENSe:]ESPectrum<sb>:RANGe<ri>:LIMit<li>:ABSolute:STOP <Level>
This command defines an absolute limit for a SEM range.
Unlike manual operation, you can define an absolute limit anytime and regardless of
the limit check mode.
Suffix:
<sb>
.
1 to 8
<ri> 1..n
Selects the measurement range.
<li> 1..n
Power class for which the limit is defined.
Parameters:
<Level> Absolute limit at the stop frequency of a SEM range.
Range:
-400 to 400
*RST: -13
Default unit: dBm
Example: SENSe:ESPectrum:RANGe:LIMit:ABSolute:STOP -15
For a detailed example see Chapter 12.5.6.11, "Example: SEM
measurement" , on page 959.
Manual operation: See "Abs Limit Start / Stop <n>" on page 244
[SENSe:]ESPectrum<sb>:RANGe<ri>:LIMit<li>:RELative:STARt <Level>
This command defines a relative limit for a SEM range.
Configuring and performing measurements