Rohde & Schwarz FSV3000, User Manual

Page: 933 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
933 User Manual 1178.8520.02 ─ 08
[SENSe:]ESPectrum<sb>:RANGe<ri>:DELete
This command removes a range from the sweep list.
Note that
●
you cannot delete the reference range
●
a minimum of three ranges is mandatory.
Suffix:
<sb>
.
1 to 8
<ri> Selects the measurement range.
Manual operation: See "Delete Range" on page 245
[SENSe:]ESPectrum<sb>:RANGe<ri>:FILTer:TYPE <FilterType>
This command selects the filter type for an SEM range.
In case of high speed measurements, the filter has to be identical for all ranges.
The EMI-specific filter types are available if the EMI (R&S FSV3-K54) measurement
option is installed, even if EMI measurement is not active. For details see Chap-
ter 5.13.3.1, "Resolution bandwidth and filter types" , on page 326.
Suffix:
<sb>
.
1 to 8
<ri> 1...30
Selects the measurement range.
Parameters:
<FilterType> NORMal
Gaussian filters
CFILter
channel filters
RRC
RRC filters
CISPr | PULSe
CISPR (6 dB) - requires EMI (R&S FSV3-K54) option
Return value for query is always
PULS
.
MIL
MIL Std (6 dB) - requires EMI (R&S FSV3-K54) option
P5
5 Pole filters
*RST:
NORM
Refer to the datasheet for available filter bandwidths.
Manual operation: See "Filter Type" on page 242
Configuring and performing measurements