manualshive.com logo in svg

Rohde & Schwarz FSV3000, User Manual

Share
Download
Rohde & Schwarz FSV3000 User Manual Download Page 832

Network operation and remote control

R&S

®

FSVA3000/ R&S

®

FSV3000

832

User Manual 1178.8520.02 ─ 08

6. Press [Enter].

The new password is now active.

11.7.3.3

 

How to configure the automatic login mechanism

Adapting the auto-login function to a new password

If you change the password that is used during auto-login, this function no longer
works. Adapt the settings for the auto-login function first.

1. Select the "Windows" icon in the toolbar to access the operating system of the

R&S

 

FSV/A (see also 

"To access the "Start" menu"

 

on page 52).

2. Open the 

C:\R_S\INSTR\USER\user\AUTOLOGIN.REG

 file in any text editor

(e.g. Notepad).

3. In the line 

"DefaultPassword"="894129"

, replace the default password

(

894129

) by the new password for automatic login.

4. Save the changes to the file.

5. In the Windows "Start" menu, select "Run".

The "Run" dialog box is displayed.

6. Enter the command 

C:\R_S\INSTR\USER\user\AUTOLOGIN.REG

.

7. Press the [ENTER] key to confirm.

The auto-login function is reactivated with the changed password. It will be applied
the next time the instrument is switched on.

Switching users when using the auto-login function

Which user account is used is defined during login. If auto-login is active, the login win-
dow is not displayed. However, you can switch the user account to be used even when
the auto-login function is active.

1. Select the "Windows" icon in the toolbar to access the operating system of the

R&S

 

FSV/A (see also 

"To access the "Start" menu"

 

on page 52).

2. Press [CTRL] + [ALT] + [DEL], then select "Sign out".

The "Login" dialog box is displayed, in which you can enter the different user
account name and password.

Deactivating the auto-login function

When shipped, the instrument is already configured to automatically log on the "instru-
ment" user under Windows

 

10. To deactivate the auto-login function, perform the fol-

lowing steps:

1. In the "Start" menu, select "Run".

The "Run" dialog box is displayed.

2. Enter the command 

C:\R_S\INSTR\USER\user\NO_AUTOLOGIN.REG

.

How to set up a network and remote control

Summary of Contents for FSV3000


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands