Getting started
R&S
®
FSVA3000/ R&S
®
FSV3000
57
User Manual 1178.8520.02 ─ 08
Furthermore, since the "SecureUser" used in secure user mode does not have admin-
istrator rights,
administrative tasks
such as LAN configuration and some general
instrument settings are not available. Refer to the description of the basic instrument
setup ([SETUP] menu) to find out which functions are affected.
Activating and deactivating secure user mode
Only a user with administrator rights can activate (and deactivate) the secure user
mode. Once activated, a restart is required. The special user "SecureUser" is then log-
ged on to the R&S
FSV/A automatically using the auto-login function. While the secure
user mode is active, a message is displayed in the status bar at the bottom of the
screen.
Secure passwords
By default, the initial password for both the administrator account and the "Secure-
User" account is "894129". When the secure user mode is activated the first time after
installation, you are prompted to change the passwords for all user accounts to
improve system security. Although it is possible to continue without changing the pass-
words, it is strongly recommended that you do so.
You can change the password in Windows
10 for any user at any time via:
"Start > Settings > Account > SignIn Options > Password > Change"
To deactivate the secure user mode, the "SecureUser" must log off and a user with
administrator rights must log on.
Switching users when using the auto-login function
In the "Start" menu, select the arrow next to the "Shut down" button and then "Log off".
The "Login" dialog box is displayed, in which you can enter the different user account
name and password.
The secure user mode setting and auto-login is automatically deactivated when
another user logs on. The "SecureUser" is no longer available.
For users with administrator rights, the secure user mode setting is available in the
general system configuration settings (see
Remote control
Initially after installation of the R&S
FSV3-K33 option, secure user mode must be
enabled manually once before remote control is possible.
(See
Manual activation is necessary to prompt for a change of passwords.
Preparing for use
