Rohde & Schwarz FSV3000, User Manual

Page: 1175 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1175 User Manual 1178.8520.02 ─ 08
Range: The value range and unit depend on the measure-
ment and scale of the x-axis.
Default unit: HZ
Example: CALC:DELT:X?
Outputs the absolute x-value of delta marker 1.
Manual operation: See "Marker 1/Marker 2/Marker 3/Marker 4" on page 317
See "Marker 1/Marker 2/Marker 3" on page 322
See "Marker Position X-value" on page 336
CALCulate<n>:MARKer<m>:AOFF
This command turns off all markers.
Suffix:
<n>
.
Window
<m> Marker
Example: CALC:MARK:AOFF
Switches off all markers.
Manual operation: See "All Markers Off" on page 522
CALCulate<n>:MARKer<ms>:LINK:TO:DELTa<md> <State>
This command links the normal source marker <ms> to any active delta destination
marker <md>.
If you change the horizontal position of marker <md>, marker <ms> changes its hori-
zontal position to the same value.
Suffix:
<n>
.
Window
<ms> source marker, see Marker
<md> destination marker, see Marker
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
Example: CALC:MARK4:LINK:TO:DELT2 ON
Links marker 4 to delta marker 2.
CALCulate<n>:MARKer<ms>:LINK:TO:MARKer<md> <State>
This command links the normal source marker <ms> to any active destination marker
<md> (normal or delta marker).
Analyzing measurements (basics)