Rohde & Schwarz FSV3000, User Manual

Page: 1096 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1096 User Manual 1178.8520.02 ─ 08
Suffix:
<p>
.
Power sensor index
Parameters:
<Level> -20 to +20 dBm
Range:
-20 dBm to 20 dBm
*RST: -10 dBm
Default unit: DBM
Example: PMET2:TRIG:LEV -10 dBm
Sets the level of the trigger
Manual operation: See "External Trigger Level" on page 368
[SENSe:]PMETer<p>:TRIGger:SLOPe <Edge>
This command selects the trigger condition for external power triggers.
Suffix:
<p>
.
Power sensor index
Parameters:
<Edge> POSitive
The measurement starts in case the trigger signal shows a posi-
tive edge.
NEGative
The measurement starts in case the trigger signal shows a neg-
ative edge.
*RST:
POSitive
Example:
PMET2:TRIG:SLOP NEG
Manual operation: See "Slope" on page 368
[SENSe:]PMETer<p>:TRIGger[:STATe] <State>
This command turns the external power trigger on and off.
Suffix:
<p>
.
Power sensor index
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
Example: PMET2:TRIG ON
Switches the external power trigger on
Manual operation: See "Using the power sensor as an external trigger"
on page 367
Setting basic measurement parameters