Rohde & Schwarz FSQ series, Quick Start Manual

Page: 219 / 229

Quick Start Guide 1313.9652.62 - 02 A.9
R&S FSQ Appendix
Installing Non-Plug&Play Printers
➢
Select the path D:\I386 by turning the rotary knob and then pressing it.
If the background of the selection bar is not blue, the selection must be marked with the
arrow up/down keys before the entry can be selected by pressing the rotary knob.
➢
Using the rotary knob, select a driver file and confirm by pressing the rotary knob.
The file will be added to the
Files Needed dialog box.
➢
Using the rotary knob, select OK and confirm by pressing the rotary knob.
The installation will be completed.
The instrument must then be configured for printout with this printer using the DEVICE SETUP
and DEVICE 1/2 softkeys in the hardcopy main menu (see section
“ Selecting and Configuring
Printers” on page 2.30 ).
A.2.2 Network Printer
Network printer installation is described in chapter 6 , section “ Installing a Network Printer” on
page 6.18 .
If the file is not available in the D:\I386 directory, you will have to
connect a data storage device containing the driver file. In this case,
exit the dialog box with ESC and repeat the selection starting with the
Files needed dialog box.