Rohde & Schwarz FSH13 Operating Manual Download Page 58

Page: 58 / 380

R&S FSH

Working with the Measurement Wizard

Preparing the Measurement

Operating Manual 1173.6275.12 - 30

2.1.2 Uploading Measurement Sets

In order to perform the actual measurements, you have to upload the wizard definition
file that contains the set of measurements to the R&S FSH.

► Select the "Wizard Set Control" function with the

button.

The R&S FSH opens a dialog box to select the measurement set(s) to upload.

► Select the measurement set you want to upload.

► Copy the files with the

button.

The software stores a copy of the measurement set in the memory of the
R&S FSH.

Alternatively, you can use a memory stick or SD card to access a measurement
set on the R&S FSH.

Summary of Contents for FSH13





























































































































































































































































































































































































Search results

Summary of Contents for FSH13

Reviews:

Brands by name

Popular brands

Rohde & Schwarz FSH13, Operating Manual

Search results

Summary of Contents for FSH13

Reviews:

Brands by name

Popular brands