R&S FSH
Operating the R&S FSH
Saving Events
Operating Manual 1173.6275.12 - 30
21
1.7 Saving Events
The R&S FSH provides functionality that automatically saves measurement information
if a certain situation or event occurs.
Saving events is possible in all operating modes.
► Press the SETUP key.
► Press the "User Preference" softkey.
► Select the "Save on Event" menu item.
► Select "On" from the "Save on Event" dropdown menu.
The R&S FSH turns on automatic event recognition. You can select one of several
events that trigger the storage of measurement data.
Data types
You can select several data types to save when an event occurs.
● A screenshot of the sweep that contains the event (.png or .jpg file)
● A dataset of the sweep that contains the event (.set file)
● The GPS coordinates of the location where the event happens (.gpx file) - a GPS
receiver and option R&S FSH-K16 is required for this
► Press the SETUP key.
► Press the "User Preference" softkey.
► Select the "Capture Screen", "Capture Dataset" or "Capture GPX" menu item and
turn it on or off.
If on, the corresponding information is included in the saved data.
Timing of the data capture
Note that the R&S FSH evaluates the measured data after a sweep is done and thus
detects and saves an event only after a sweep has been completed.
Event types
To use the "Save on Event" functionality, you have to select an event type that triggers
the capture of the selected data. The R&S FSH supports several event types.
► Press the SETUP key.
► Press the "User Preference" softkey.
► Select the "Event Source" menu item and select an event type from the dropdown
menu.
