manualshive.com logo in svg

Rohde & Schwarz FPL1000 Series, User Manual

Share
Download
Rohde & Schwarz FPL1000 Series User Manual Download Page 79

Getting Started

R&S

®

FPL1000

79

User Manual 1178.3370.02 ─ 03

2. Select the "Keyboard" icon besides the entry field.

3. Enter the string you want to find.

If you enter several strings with blanks between, topics containing all words are
found (same as AND operator).

For advanced search, consider the following:
● To find a defined string of several words, enclose it in quotation marks. For

example, a search for 

"trigger qualification"

 finds all topics with exactly 

"trigger

qualification"

. A search for 

trigger qualification

 finds all topics that contain the

words 

trigger

 and 

qualification

.

● Use "Match whole word" and "Match case" to refine the search.
● Use operators AND, OR, and NOT.

To close the Help window

► Select the "Close" icon in the upper right corner of the help window.

Or: Press the ESC key.

4.4.6 Remote Control

In addition to working with the R&S

 

FPL1000 interactively, located directly at the instru-

ment, it is also possible to operate and control it from a remote PC. Various methods
for remote control are supported:

●

Connecting the instrument to a (LAN) network (see 

Chapter 4.1.5, "Setting Up a

Network (LAN) Connection"

, 

on page 27)

●

Using the LXI browser interface in a LAN network

●

Using the Windows Remote Desktop application in a LAN network

●

Connecting a PC via the GPIB interface

How to configure the remote control interfaces is described in the User Manual.

The R&S

 

FPL1000 is delivered with 

IECWIN

 installed, the auxiliary remote control tool

provided free of charge by R&S.
For details on the IECWIN tool, see the "Network and Remote Control" chapter of the
R&S

 

FPL1000 User Manual.

4.4.6.1

Using the LXI Browser Interface in a LAN

LAN eXtensions for Instrumentation (LXI) is an instrumentation platform for measuring
instruments and test systems that is based on standard Ethernet technology. LXI is
intended to be the LAN-based successor to GPIB, combining the advantages of Ether-
net with the simplicity and familiarity of GPIB. The LXI browser interface allows for
easy configuration of the LAN and remote control of the R&S

 

FPL1000 without addi-

tional installation requirements.

 

 

Operating the Instrument

Summary of Contents for FPL1000 Series




































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands