Rohde & Schwarz FPL1000 Series, User Manual

Page: 333 / 899

The Spectrum Application (RF Measurements)
R&S
®
FPL1000
333 User Manual 1178.3370.02 ─ 03
For details on filter types, see Chapter 7.6.1.6, "Which Data May Pass: Filter Types" ,
on page 394.
Remote command:
[SENSe:]LIST:RANGe<range>:FILTer:TYPE
on page 593
RBW
Sets the RBW value for this range.
For details on the RBW, see Chapter 7.6.1.1, "Separating Signals by Selecting an
Appropriate Resolution Bandwidth" , on page 390.
Remote command:
[SENSe:]LIST:RANGe<range>:BANDwidth:RESolution
on page 591
VBW
Sets the VBW value for this range.
For details on the VBW, see Chapter 7.6.1.2, "Smoothing the Trace Using the Video
Bandwidth" , on page 391.
Remote command:
[SENSe:]LIST:RANGe<range>:BANDwidth:VIDeo
on page 592
Sweep Time Mode
Activates or deactivates the auto mode for the sweep time.
For details on the sweep time mode, see Chapter 7.6.1.7, "How Long the Data is Mea-
sured: Sweep Time " , on page 394
Remote command:
[SENSe:]LIST:RANGe<range>:SWEep:TIME:AUTO
on page 597
Sweep Time
Sets the sweep time value for the range.
For details on the sweep time, see Chapter 7.6.1.7, "How Long the Data is Measured:
Sweep Time " , on page 394
Remote command:
[SENSe:]LIST:RANGe<range>:SWEep:TIME
on page 597
Detector
Sets the detector for the range.
For details, refer to "Mapping Samples to sweep Points with the Trace Detector"
on page 460.
Remote command:
[SENSe:]LIST:RANGe<range>:DETector
on page 593
Reference Level
Sets the reference level for the range.
For details on the reference level, see Chapter 7.5.1.1, "Reference Level" ,
on page 382.
Measurements and Results