Data Management
R&S
®
FPC
50
User Manual 1178.4130.02 ─ 07
4. Select your preferred directory to store data in.
5. Confirm your selection with "Load".
6. Select the "Using Working Directory" menu item and turn it "On".
Screenshots are automatically stored in the working directory you have selected.
When you save a dataset, the R&S
FPC automatically opens the file manager at
the working directory.
Changing the default file name for datasets
1. Press the "Setup" key to open the setup menu.
2. Select the "User Preference" menu item.
3. Select the "Default Dataset Name" menu item in the "Dataset" category.
4. Enter the default file name you like.
From now on, the R&S
FPC will save datasets with the file name you have
entered. It will still add a consecutive number to the file name (
Result001
,
Result002
etc.).
Restoring datasets
1. Press the "Save Recall" key to open the file menu.
2. Select the "Recall" menu item to open the file manager.
When you restore a dataset, the R&S
FPC automatically opens the
\Datasets
folder.
3. If you want to restore the dataset from a different folder or an external memory
device, navigate to the folder with the dataset.
4. Confirm your selection with the "Load" menu item.
Previewing a dataset
Before you restore a dataset, you can preview the dataset. This can be useful, if you
are not sure which dataset you want to restore and view all available datasets first.
The preview is like a screenshot and lets you take a quick look at that measurement
and its settings. The R&S
FPC does not yet activate the measurement settings of that
dataset.
1. Press the "Save Recall" key to open the file menu.
2. Select the "Recall" menu item to open the file manager.
When you want to preview a dataset, the R&S
FPC automatically opens the
\Datasets
folder.
3. If you want to preview the dataset from a different folder or an external memory
device, navigate to the folder with the dataset.
4. Confirm your selection with the "Preview" menu item.
