Instrument Setup
R&S
®
FPC
44
User Manual 1178.4130.02 ─ 07
Defining the key click volume
The key click volume defines the volume of the sound that the R&S
FPC produces
when you press a key or softkey.
1. Press the "Setup" key to open the setup menu.
2. Select the "Instrument Setup" menu item to open the instrument setup dialog box.
3. Select the "Key Click Volume" menu item in the "Audio" category.
4. Select the volume that you prefer.
The volume is a percentage from 0
% to 100
% with 100
% being the loudest.
Defining the system beeper volume
The system beeper volume defines the volume of the system beeper. The system
beeper produces a sound, for example, if a message box turns up.
1. Press the "Setup" key to open the setup menu.
2. Select the "Instrument Setup" menu item to open the instrument setup dialog box.
3. Select the "System Beeper Volume" menu item in the "Audio" category.
4. Select the volume that you prefer.
The volume is a percentage from 0
% to 100
% with 100
% being the loudest.
Turning audio output in case of a power overload on and off
If the R&S
FPC detects an overload at one of its inputs, you can configure it to make a
sound.
1. Press the "Setup" key to open the setup menu.
2. Select the "Instrument Setup" menu item to open the instrument setup dialog box.
3. Select the "Beep On Power Overload" menu item in the "Audio" category.
4. Select the setting you prefer.
If on, the R&S
FPC makes a sound every time it detects an overload.
9.7
Power Settings
Turning automatic system boot on and off
1. Press the "Setup" key to open the setup menu.
2. Select the "Instrument Setup" menu item to open the instrument setup dialog box.
3. Select the "Auto Power Up On AC" menu item in the "Power" category.
4. Select the setting of your choice.
Power Settings
