Instrument tour
R&S
®
FE50DTR
24
Manual 1179.3180.02 ─ 02
●
"IF Out A": Output of the IF signal to the vector signal analyzer, e.g.,
R&S
FSV/A. This signal has a frequency, which is measurable for the
R&S
FSV/A.
Chapter 4.8, "Connecting to SMA and 1.85
The current external frontend firmware does not support "IF In A" as IF input and
does not support "IF Out B" as IF output.
5.2.2
Ref. In connector
SMA female connector for providing a reference signal for oscillators inside the
R&S
FE50DTR.
Chapter 4.8, "Connecting to SMA and 1.85
5.2.3
LO in/LO out connectors
SMA female connectors for local oscillator input and output in setups with more
than one R&S
FE50DTR.
The connectors are reserved for future use.
5.2.4
USB in connector
Type-B USB 2.0 input connector for service purposes. The connector is reserved
for future use.
5.2.5
Power supply connector
Main power supply connector for connection of the external DC power supply.
Chapter 4.6, "Connecting to power"
5.2.6
LAN connector
RJ-45 connector to connect the R&S
FE50DTR to a LAN. Connection is required
to control the R&S
FE50DTR by a vector signal generator and/or a vector signal
analyzer.
Rear panel tour
