R&S EX-IQ-BOX Configuration
R&S
®
EX-IQ-BOX
70
User Manual 1409.5570.32 ─ 05
●
During installation, R&S
DigIConf creates several directories, including the settings
directory, which is scheduled for storing application settings. With this field you can
individually select a directory with application-specific settings files.
●
If you uninstall DigIconf, you can keep these files. The same applies if you update
R&S
DigIConf.
SCPI Server Port
Select the port address of the server for remote control.
Info Server Port
Sets the port address of the TCP/IP connection.
Provides information on TCP/IP connection on this port, such as parallel, locked, USB or
LVDS.
Show Taskbar
Activates the display of the taskbar in the block diagram. Changing the setting requires
a restart of R&S
DigIConf.
Remote command:
n.a.
6.1.6.4
Instrument on the R&S EX-IQ-BOX
This dialog covers information on the connected R&S instrument. In addition, R&S
Dig-
IConf provides the remote control of the instrument.
The instruments block and the configuration dialog are available, if an R&S instrument is
connected.
R&S instruments can be remote controlled from an external PC via LAN (TCP/IP), GPIB
or USB. This allows convenient operation of the instruments from R&S
DigIConf, too.
Settings are sent by R&S
DigIConf into the instruments via SCPI commands, which are
entered in the SCPI Interactive tab or the SCPI Scripting tab.
Refer to the operating manual of your R&S instrument for details to interfaces and pro-
gramming for the remote control.
The dialog is accessed in the block of the connected instrument:
Click on the <instrument> button in the instrument block.
R&S DigIConf Configuration Software
Summary of Contents for EX-IQ-BOX
Page 147: ...Protocol Settings R S EX IQ BOX 132 User Manual 1409 5570 32 05 CPRI...
Page 391: ......
