Rohde & Schwarz EX-IQ-BOX, User Manual

Page: 71 / 418

R&S EX-IQ-BOX Configuration
R&S
®
EX-IQ-BOX
56 User Manual 1409.5570.32 ─ 05
Table 6-2: Icons and the corresponding functions
Icon Function Corresponding Menu item
Preset File > New
Load Settings File > Open
Save Settings File > Save
Indicates that
R&S
DigIConf is
remotely operated.
---
File handling is described briefly in
​
chapter 6.1.2.1, "File Menu" , on page 58
6.1.1.3 Info
The info line reports and indicates the current state with status, error and warning mes-
sages. Detailed information on the messages is shown in the info window, called by the
info button. For description in detail refer to
​
chapter 6.1.3, "Info Line and Window" ,
on page 60.
6.1.1.4 Block Diagram
The diagram is built up like the display of the R&S Signal Generators. Test system archi-
tecture and signal flow are shown in the block diagram. Each R&S
EX-IQ-BOX is
assigned to a block, which is shown always in a line with an instrument block and a DUT.
The DUT is displayed as passive block.
Block Diagram
R&S DigIConf may handle up to four R&S EX-IQ-BOX devices simultaneously. The
number of R&S EX-IQ-BOXes to be configured is set in the entry field "Number of
R&S EX-IQ-BOXes" located in the toolbar.
The block diagram in the figure below represents a configuration with one R&S EX-IQ-
BOX and one R&S instrument, i.e. in this case an R&S AMU200A.
The R&S EX-IQ-BOX transfers test signals to a DUT or from a DUT to an R&S instrument:
●
in transmitter mode the signals are transferred from an R&S instrument in conjunc-
tion with the R&S EX-IQ-BOX to a DUT.
●
in receiver mode incoming signals from a DUT are forwarded to an R&S instrument
from the R&S EX-IQ-BOX.
R&S DigIConf Configuration Software