Rohde & Schwarz EX-IQ-BOX, User Manual

Page: 386 / 418

Annex
R&S
®
EX-IQ-BOX
371 User Manual 1409.5570.32 ─ 05
Table 1-2: List of the automatically assigned file extensions in R&S DigIConf
Function/Digital
Standard List type Contents File suffix
CPRI Settings CPRI configuration, vendor data included
Instrument settings
*.cpri
Waveform Waveforms and multi segment waveforms *.wv
User Defined Settings User Defined Protocol configuration *.iqbox
Configuration Soft-
ware Settings R&S DigIConf settings *.savrcl
A.3 Preset
The following lists give an overview of the key preset values of the corresponding proto-
cols.
A.3.1 User Defined Default Settings
This section contains the default settings of the parameters for user defined protocols,
sorted by the tabs in R&S
DigIConf.
Main Controls
Parameter Default value
State Off
Logic Type 3.3 V CMOS
Direction Transmitter
Protocol
Parameter Default value
Format Parallel
Data Rate SDR
Interleaving Not Interleaved
Data
Parameter Default value
Word Size 16 Bit
Word Alignment LSB
Preset