Remote Control Commands
R&S
®
EX-IQ-BOX
350
User Manual 1409.5570.32 ─ 05
Parameters:
<Srate>
float
Range:
1000 to 100000000
*RST:
3840000
Example:
SOUR1:EBOX:CPRI:TX:SIGN:SRATe?
query the sample rate of the first signal in transmitter mode.
Manual operation:
See
[:SOURce<hw>]:EBOX:CPRI:TX|RX:SIGNal<ch>:STANdard
<Standard>
This command selects a communication standard. R&S
DigIConf provides the selection
of a standard signal with automatically assigned sample rate. Alternatively, select a signal
from a waveform file, the ARB function, or assign user-specific values.
R&S
DigIConf supports all current standards and their variants. When selecting a stand-
ard signal, the program automatically sets the relevant parameters and values.
For example, a loaded digital standard automatically adjusts the needed AxCs, assigns
the sample rate, and sets up several other relevant parameters.
Note:
The digital standard signals, or user defined signals refer to external signal input
or output, i.e. the physical signal sources DIG IQ IN or DIG IQ OUT.
CPRI Remote Control Commands
Summary of Contents for EX-IQ-BOX
Page 147: ...Protocol Settings R S EX IQ BOX 132 User Manual 1409 5570 32 05 CPRI...
Page 391: ......
