Remote Control Commands
R&S
®
EX-IQ-BOX
334
User Manual 1409.5570.32 ─ 05
Return values:
<Count>
integer
Range:
1 to 24
Increment: 1
*RST:
1
Example:
SOUR1:EBOX:CPRI:TX:AXC0:SOUR?
check the number of used AxCs.
Response:
18
18 AxCs are currently in use.
Usage:
Query only
[:SOURce<hw>]:EBOX:CPRI:TX|RX:AXC<ch0>:BADDress
<Baddress>
The position of the AxC within the CPRI basic frame is defined by word address and bit
address. This command queries or defines the bit address, i.e. the starting bit inside the
word, see
Parameters:
<Baddress>
float
Range:
0 to 38
Increment: 2
*RST:
0
Example:
SOUR1:EBOX:CPRI:TX:AXC0:BADD 0
set the starting bit to "0".
Manual operation:
See
[:SOURce<hw>]:EBOX:CPRI:TX|RX:AXC<ch0>:CONFlict?
A conflict arises, when AxCs overlap. The command queries the status of overlapping.
Return values:
<Conflict>
OFF | ON
No overlapping occurred.
AxCs overlapped.
*RST:
0
Example:
SOUR1:EBOX:CPRI:TX:AXC3:CONF?
check if AxC3 overlaps with a previous one.
Response:
0
if OK,
1
if not OK
Usage:
Query only
Manual operation:
See
[:SOURce<hw>]:EBOX:CPRI:TX|RX:AXC<ch0>:PSRC?
Queries the physical signal source.
CPRI Remote Control Commands
Summary of Contents for EX-IQ-BOX
Page 147: ...Protocol Settings R S EX IQ BOX 132 User Manual 1409 5570 32 05 CPRI...
Page 391: ......
