Remote Control Commands
R&S
®
EX-IQ-BOX
307
User Manual 1409.5570.32 ─ 05
[:SOURce<hw>]:EBOX:CPRI:HW:R21T?
Displays the cable delay.
Return values:
<r21>
float
Example:
EBOX:CPRI:HW:R21T?
Response:
'-117 ns'
Usage:
Query only
Manual operation:
See
[:SOURce<hw>]:EBOX:CPRI:HW:RCLock:CRLocked?
This command queries, if clock recovery is unlocked. Clock recovery must be locked in
CPRI REC test mode.
Return values:
<Reclocked>
0 | 1
ON
The clock recovery is locked.
OFF
The clock recovery is unlocked.
*RST:
1
Example:
SOUR1:EBOX:CPRI:HW:RCL:CRL?
check if clock recovery is locked.
Response:
1
clock recovery is locked.
Usage:
Query only
Manual operation:
See
[:SOURce<hw>]:EBOX:CPRI:HW:RCLock:CSLocked?
This command queries, if the main PLL of the R&S
EX-IQ-BOX is unlocked. This state
is fundamental and must be locked in every operating mode of the R&S
EX-IQ-BOX.
Return values:
<Slocked>
OFF | ON
ON
The PLL is locked.
OFF
The PLL is unlocked.
*RST:
1
CPRI Remote Control Commands
Summary of Contents for EX-IQ-BOX
Page 147: ...Protocol Settings R S EX IQ BOX 132 User Manual 1409 5570 32 05 CPRI...
Page 391: ......
