Remote Control Commands
R&S
®
EX-IQ-BOX
262
User Manual 1409.5570.32 ─ 05
Usage:
Query only
[:SOURce<hw>]:EBOX:USER:SETTing:DELete
<Delete>
The command removes a settings file from the specified directory. Determine the file by
adding directory, file name and extension of the file.
Setting parameters:
<Delete>
<directory>, <file_name>, <ext>
Determine the file to be deleted by adding directory, file name and
the file extension (
*.iqbox
).
Example:
SOUR1:EBOX:USER:SETT:DEL "d:
\DigIConf\Settings\User\converter_test.iqbox"
delete the file
converter_test.iqbox
.
Usage:
Setting only
[:SOURce<hw>]:EBOX:USER:SETTing:LOAD
<Load>
The command loads a previously saved user defined configuration. Define directory and
file name, R&S
DigIConf automatically assigns the file extension
*.iqbox
.
Setting parameters:
<Load>
<directory>, <file_name>
String parameter to determine the target directory and the file-
name for loading the settings file.
Example:
SOUR1:EBOX:USER:SETT:LOAD "d:
\DigIConf\Settings\User\converter_test"
load the settings file
converter_test.iqbox
from the directory
d:\DigIConf\Settings\User
.
Usage:
Setting only
Manual operation:
See
[:SOURce<hw>]:EBOX:USER:SETTing:STORe
<Store>
Saves the current signal configuration of user defined mode. Specify the directory and
file name. R&S
DigIConf automatically assigns the file extension
*.iqbox
to user
defined configuration files.
Setting parameters:
<Store>
<directory>, <file_name>
String parameter to determine the target directory and the file-
name for storing the settings file.
Example:
SOUR1:EBOX:USER:SETT:STOR "d:
\DigIConf\Settings\User\converter_test"
save the settings in the file
converter_test.iqbox
in the
directory
d:\DigIConf\Settings\User
.
User Defined - Remote Control Commands
Summary of Contents for EX-IQ-BOX
Page 147: ...Protocol Settings R S EX IQ BOX 132 User Manual 1409 5570 32 05 CPRI...
Page 391: ......
