Protocol Settings
R&S
®
EX-IQ-BOX
172
User Manual 1409.5570.32 ─ 05
Fig. 7-68: CPRI uplink dialog
7.2.9.1
Signal Definition
Section "Signal Definition" contains all information which is important to define the I/Q
signals to be transmitted, or received via the CPRI link. On the left the table lists all defined
signals, and on the right of it input and display fields show the respective settings of the
selected signal. Signals are added, copied or removed by means of buttons and a groups
table indicates the AxCs assigned to a group.
The active AxCs are shown on the top right of this tab graphically. You find the description
to this graphic under
chapter 7.2.9.2, "AxC Container Definition"
Signal Table
The table lists the all defined signals. Select a signal in the table, to view the current
settings of this signal.
The list can take up at most 24 signals, according to the maximum number of AxCs, since
a signal needs at least one AxC.
CPRI
Summary of Contents for EX-IQ-BOX
Page 147: ...Protocol Settings R S EX IQ BOX 132 User Manual 1409 5570 32 05 CPRI...
Page 391: ......
