Protocol Settings
R&S
®
EX-IQ-BOX
119
User Manual 1409.5570.32 ─ 05
The parameter is grayed out, when an external, or the internal reference clock of the
R&S
EX-IQ-BOX is used.
"5 | 10 | 13"
Provided reference frequencies in MHz.
Remote command:
Freq. Counter
The function counts and indicates the actually reference frequency, fed by an R&S instru-
ment, or the DUT.
Remote command:
7.1.6 Trigger
In the "Trigger" tab you can configure and activate a trigger signal, when the R&S
EX-
IQ-BOX is working in transmitter mode.
Fig. 7-37: User defined > Trigger dialog
Trigger Source
Select the trigger source. The trigger signal starts the signal output at the user interface.
"Auto"
Outputs the signal immediately.
"Sync"
Synchronizes signal output with an incoming trigger signal, i.e. the DUT
triggers data output to the R&S
EX-IQ-BOX. The trigger signal is applied
at the SYNC IN pin of the user interface.
Remote command:
User Defined
Summary of Contents for EX-IQ-BOX
Page 147: ...Protocol Settings R S EX IQ BOX 132 User Manual 1409 5570 32 05 CPRI...
Page 391: ......
