
Numeric Measurement Modes
R&S
®
EVSG1000
104
User Manual 1178.6227.02 ─ 06
●
TO
: North direction at the receiver/ aircraft
To convert one notation to the other, use the following equation:
Phase
TO
= Phase
FROM
+ 180 deg
4.3.2
VOR Measurements and Results
The VOR measurement provides multiple views for the measurement results.
Switching from numeric to graphical results
You can display graphical results directly from the VOR mode by selecting the softkey
in the "Meas" menu. In this case, the settings for the current measurement are applied
to the graphical results.
The graphical results are only availabe for a single carrier. Thus, when you switch to a
graphical measurement mode from VOR mode, you must select the carrier for which
you want to see the graphical results. When you select the softkey, a submenu is dis-
played to select the carrier.
You can select one of the following carriers:
●
Main carrier, AM demodulated
●
Subcarrier, AM demodulated (AM component)
●
Subcarrier, FM demodulated (FM component)
To return from the graphical results to the VOR mode, select "Return" ([F7]).
For details on the graphical results, see:
●
Chapter 5.1, "RF Spectrum Mode (Option R&S
●
Chapter 5.2, "IF Spectrum Mode (Option R&S
●
Chapter 5.3, "AF Spectrum Mode (Option R&S
●
Chapter 5.4, "AF Time Domain Mode (Option R&S
Remote command:
RF Level and Frequency Display
..........................................................................105
.............................................................................................106
............................................................................................. 108
...........................................................................................110
............................................................................................ 112
VOR Mode (Option R&S
EVSG-K2)