manualshive.com logo in svg

Rohde & Schwarz EVSF1000, User Manual

Share
Download
Rohde & Schwarz EVSF1000 User Manual Download Page 136

GBAS/SCAT-I Mode (Options R&S

 

EVSG-K4/-K5)

R&S

®

EVSF1000

136

User Manual 1178.6410.02 ─ 05

8.6.1

 

General Processing

The parser in the R&S

 

EVSG GBAS/SCAT-I application uses the first message control

xml file as instructions for processing. As input, it receives a bitstream from the GBAS
burst in the input signal.

The general process of interpreting the bitstream consists of the following steps:

1. The parser applies the first instruction on the leading bits of the bitstream, which

usually produces a value or text as output.

2. The parser applies the next instruction on the subsequent bits of the bitstream.

As a result, either an output is produced, or further instructions are provided. Fur-
ther instructions can be provided in additional xml files, or depend on the current
bitstream value, or on a previous value (see 

"Control elements"

 

on page 138).

3. The parser continues to process the instructions as defined in the xml file, applying

them to the subsequent, not-yet-processed bits of the bitstream.

4. When the end of the last xml file has been processed, the parser stops.

The converted, human-readable data is displayed in the "Message" view.

Message XML Interface

Summary of Contents for EVSF1000








































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands