manualshive.com logo in svg

Rohde & Schwarz ESW Series, User Manual

Share
Download
Rohde & Schwarz ESW Series User Manual Download Page 82

Operating the Instrument

R&S

®

ESW

82

User Manual 1177.6298.02 ─ 08

●

Connecting the instrument to a (LAN) network (see 

Chapter 4.5, "Setting Up a Net-

work (LAN) Connection"

, 

on page 34)

●

Using the LXI browser interface in a LAN network

●

Using the Windows Remote Desktop application in a LAN network

●

Connecting a PC via the GPIB interface

How to configure the remote control interfaces is described in the User Manual.

The R&S

 

ESW is delivered with 

IECWIN

 installed, the auxiliary remote control tool pro-

vided free of charge by Rohde

 

&

 

Schwarz.

For details on the IECWIN tool, see the "Network and Remote Control" chapter of the
R&S

 

ESW User Manual.

6.7.1

 

Using the LXI Browser Interface in a LAN

LAN eXtensions for Instrumentation (LXI) is an instrumentation platform for measuring
instruments and test systems that is based on standard Ethernet technology. LXI is
intended to be the LAN-based successor to GPIB, combining the advantages of Ether-
net with the simplicity and familiarity of GPIB. The LXI browser interface allows for
easy configuration of the LAN and remote control of the R&S

 

ESW without additional

installation requirements.

For details see 

Chapter 4.2.3, "Login"

, 

on page 28.

Via the LXI browser interface to the R&S

 

ESW you can control the instrument remotely

from another PC. Manual instrument controls are available via the front panel simula-
tion. File upload and download between the instrument and the remote PC is also
available. Using this feature, several users can access 

and operate

 the R&S

 

ESW

simultaneously. This is useful for troubleshooting or training purposes. If necessary,
this feature can be deactivated.

For details see 

"LXI Web Browser Interface"

 

on page 360.

6.7.2

 

Remote Desktop Connection

Remote Desktop is a Windows application which can be used to access and control
the instrument from a remote computer through a LAN connection. While the instru-
ment is in operation, the instrument screen contents are displayed on the remote com-
puter. Remote Desktop provides access to all of the applications, files, and network
resources of the instrument. Thus, remote operation of the instrument is possible.

The Remote Desktop Client is part of the installed Windows operating system. For
other versions of Windows, Microsoft offers the Remote Desktop Client as an add-on.

Remote Control

Summary of Contents for ESW Series
























































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands