manualshive.com logo in svg

Rohde & Schwarz ESRP, Getting Started

Share
Download
Rohde & Schwarz ESRP Getting Started Download Page 66

Basic Operations

R&S

®

ESRP

66

Getting Started 1316.4697.02 ─ 07

If a menu entry contains an arrow to the right of it, a submenu is available for that
entry.

► To close the menu, press the ESC key or click in the display outside of the

menu.

6.2.9

 

Dialog Boxes

In most cases, the R&S

 

ESRP dialog boxes are designed to enter a numeric

value. In the documentation, these dialog boxes are called "edit dialog boxes".
Dialog boxes that are not only designed for parameter entry have a more complex
structure and, in the documentation, are called "dialog boxes". The navigation in
Windows dialog boxes differs in some aspects from the navigation in R&S

 

ESRP

dialog boxes. For details, see 

Chapter 6.3.3, "Navigating in Dialog Boxes"

,

on page 70.

The following figure shows an example of a edit dialog box:

Means of User Interaction

Summary of Contents for ESRP





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands