Rohde & Schwarz ESRP Series, User Manual

Page: 897 / 1094

Remote Control
R&S
®
ESRP
894 User Manual 1175.7445.02 ─ 08
DIAGnostic<n>:SERVice:VERSinfo?
This command queries information about the hardware and software components.
Suffix:
<n>
.
irrelevant
Return values:
<Information> String containing the version of hardware and software compo-
nents including the types of licenses for installed firmware
options.
Usage: Query only
SCPI confirmed
SYSTem:IDENtify:FACTory
Resets the response to the *IDN? query to the default value, e.g. after a user string
was defined using the
ID String User softkey.
Example: SYST:IDEN:FACT
*IDN?
Response:
Rohde&Schwarz,R&S ESRP-7,1307.9002K07/101768,
1.05
Usage: Event
SCPI confirmed
Manual operation: See "ID String Factory" on page 485
SYSTem:IDENtify[:STRing] <String>
Sets the response to the *IDN? query to the defined string, e.g. after the default value
was reset using the
ID String Factory softkey.
Parameters:
<String>
Example: Set the response to 'MyDevice':
SYST:IDEN:STR 'MyDevice'
Query the response:
SYST:IDEN:STR?
Response:
MyDevice
Usage: SCPI confirmed
Manual operation: See "ID String User" on page 485
SYSTem:ERRor:CLEar:ALL
This command deletes all entries in the table SYSTEM MESSAGES.
System Configuration