Quick Start
R&S
®
ESRP
86
User Manual 1175.7445.02 ─ 08
To return to selection mode in the diagram
While you are in zoom mode, touching the screen changes the zoom area. In order to
select or move a trace or marker, you must switch back to selection mode:
► Click on the "Selection mode" icon in the toolbar.
To return to original display
► Click on the "Zoom Off" icon in the toolbar.
A dotted rectangle is displayed in the diagram.
Remote commands:
1. Activate the zoom mode:
DISP:ZOOM ON
2. Define the zoom area:
DISP:ZOOM:AREA 5,30,20,100
3. Hide the overview window:
DISP:ZOOM:OVER OFF
3.4.4.7
Adding a Title to the Diagram Header
You can add an introductory title to the trace information in the diagram header.
1. Press the SETUP key.
Basic Operations
