Rohde & Schwarz ESRP Series, User Manual

Page: 661 / 1094

Remote Control
R&S
®
ESRP
658 User Manual 1175.7445.02 ─ 08
CALCulate<n>:MARKer<m>:X:SLIMits:LEFT <Limit>
This command sets the left limit of the marker search range.
If the power measurement in zero span is active, this command limits the evaluation
range to the trace.
Note : The function is only available if the search limit for marker and delta marker is
switched on (see
CALCulate<n>:MARKer<m>:X:SLIMits[:STATe]
).
Suffix:
<n>
.
Selects the measurement window.
<m> irrelevant
Parameters:
<Limit> The value range depends on the span or sweep time.
The unit is Hz for frequency domain measurements and s for
time domain measurements.
Range:
0 to MAX
*RST: left diagram border
Example: CALC:MARK:X:SLIM ON
Switches the search limit function on.
CALC:MARK:X:SLIM:LEFT 10MHz
Sets the left limit of the search range to 10 MHz.
Manual operation: See "Left Limit" on page 182
See "Left Limit" on page 273
CALCulate<n>:MARKer<m>:X:SLIMits:RIGHT <Limit>
This command sets the right limit of the marker search range.
If the power measurement in zero span is active, this command limits the evaluation
range to the trace.
Note : The function is only available if the search limit for marker and delta marker is
switched on (
CALCulate<n>:MARKer<m>:X:SLIMits[:STATe]
).
Suffix:
<n>
.
Selects the measurement window.
<m> irrelevant
Parameters:
<Limit> The value range depends on the span or sweep time.
The unit is Hz for frequency domain measurements and s for
time domain measurements.
Range:
0 to MAX
*RST: left diagram border
Remote Commands in Receiver Mode