Command Reference
R&S
®
CMW500
236
User Manual 1173.9463.02 ─ 02
It evaluates the CONDition parts of the lowest level OPERation status registers. The
result consists of a comma separated list of strings. Each string indicates the state of one
task and is composed of the complete path of the status register plus the state. The
command is nondestructive.
In most situations the returned list shows all task states of the installed firmware appli-
cations. However it may happen that a task is not listed if currently no resources at all
are assigned to that task (e.g. directly after installation). In that case you could say that
the state of the task is less than "OFF".
Query parameters:
'<RegExp>'
Optional regular expression filtering the returned results, see also
.
Example:
STATus:CONDition:BITS:ALL? '(POW)|(IQV)'
List the current task states of the installed firmware applications.
Limit the results to strings containing 'POW' (GPRF power mea-
surement) or 'IQV' (GPRF IQ vs slot measurement).
Usage:
Query only
Firmware/Software:
V1.0.4.11
STATus:CONDition:BITS:COUNt?
['<RegExp>']
Returns the number of task states listed by
STATus:CONDition:BITS:ALL?
.
Query parameters:
'<RegExp>'
Optional regular expression filtering the task states before they are
counted, see also
.
Example:
STATus:CONDition:BITS:COUNt?
List the number of task states returned by
STATus:CONDition:BITS:ALL?
.
Usage:
Query only
Firmware/Software:
V1.0.4.11
STATus:CONDition:BITS:CATaloge?
['<RegExp>']
Returns a list of all possible task states for the installed firmware applications. The current
task states returned by
STATus:CONDition:BITS:ALL?
form a subset of the list
returned by this command.
Query parameters:
'<RegExp>'
Optional regular expression filtering the returned results, see also
.
Example:
STATus:CONDition:BITS:CATaloge?
List all possible task states of the installed firmware applications.
Usage:
Query only
Firmware/Software:
V1.0.4.11
Instrument-Control Commands
