Remote Control
R&S
®
CMW500
188
User Manual 1173.9463.02 ─ 02
Password protection
Changing the LAN configuration is password-protected. The password reads
LxiWe-
bIfc
(notice upper and lower case characters). This password cannot be changed in the
current software version.
6.9.3.2
Advanced Config
The navigation entry "Advanced Config" provides access to additional LAN parameters
that are not declared mandatory by the LXI standard.
The advanced LAN configuration parameters are used as follows:
●
"Negotiation": The negotiation configuration field provides different Ethernet speed
and duplex mode settings. In general, the Auto Detect mode is sufficient.
●
"ICMP Ping" must be enabled to use the ping utility.
●
"VXI-11 Discovery": VXI-11 is the protocol that is used for discovery of the instrument
in the LAN. According to the standard, LXI devices must use VXI-11 to provide a
discovery mechanism; other additional discovery mechanisms are permitted.
●
"mDNS and DNS-SD": Multicast DNS and DNS Service Discovery. These functions
are not yet supported.
Password protection
Changing the LAN configuration is password-protected. The password reads
LxiWe-
bIfc
(notice upper and lower case characters). This password cannot be changed in the
current software version.
6.9.3.3
Ping Client
Ping is a utility that verifies the connection between the LXI-compliant instrument and
another device. The ping is initiated from the instrument. It uses the ICMP echo request
and echo reply packets to determine whether the LAN connection to another device is
functional. Ping is useful for diagnosing IP network or router failures.
LXI Configuration
