Command Reference
R&S
®
CMW-KM750/-KM751
140
User Manual 1173.9670.02 ─ 05
FETCh:TDSCdma:MEAS<i>:MEValuation:LIST:MODulation:CURRent?
FETCh:TDSCdma:MEAS<i>:MEValuation:LIST:MODulation:MAXimum?
Return current and maximum modulation single value results in list mode.
The values listed below in curly brackets {} are returned for the segments {...}
seg 1
, {...}
seg
2
, ..., {...}
seg n
, with n determined by
.
Return values:
<1_Reliability>
In list mode, a zero reliability indicator indicates that the results in
all measured segments are valid. A non-zero value indicates that
an error occurred in at least one of the measured segments.
{<2_SegReliability>
Reliability indicator for the segment. The meaning of the returned
values is the same as for the common reliability indicator, see
previous parameter.
<3_EVMRMS>
<4_EVMPeak>
Error vector magnitude RMS and peak value
Range:
0 % to 100 %
Default unit: %
<5_MagErrRMS>
Magnitude error RMS value
Range:
0 % to 100 %
Default unit: %
<6_MagErrPeak>
Magnitude error peak value
Range:
-100 % to 100 %
Default unit: %
<7_PhaseErrRMS>
Phase error RMS value
Range:
0 deg to 180 deg
Default unit: deg
<8_PhaseErrPeak>
Phase error peak value
Range:
-180 deg to 180 deg
Default unit: deg
<9_IQOriginOffset>
I/Q origin offset
Range:
-100 dB to 0 dB
Default unit: dB
<10_IQImbalance>
I/Q imbalance
Range:
-100 dB to 0 dB
Default unit: dB
<11_TransTimeErr> Transmit time error
Range:
-500 chips to 500 chips
Default unit: chips
Multi Evaluation Measurement Commands
