Command Reference
R&S
®
CMW-KM750/-KM751
135
User Manual 1173.9670.02 ─ 05
Firmware/Software:
V3.0.10
Options:
R&S CMW-KM012
FETCh:TDSCdma:MEAS<i>:MEValuation:LIST:MODulation:WQUality:CURRent?
FETCh:TDSCdma:MEAS<i>:MEValuation:LIST:MODulation:WQUality:AVERage?
FETCh:TDSCdma:MEAS<i>:MEValuation:LIST:MODulation:WQUality:MAXimum?
FETCh:TDSCdma:MEAS<i>:MEValuation:LIST:MODulation:WQUality:
SDEViation?
Return waveform quality values for all measured list mode segments.
Return values:
<Reliability>
<WaveformQuality> Comma separated list of values, one per measured segment
Range:
0 to 1
Example:
See
Usage:
Query only
Firmware/Software:
V3.0.10
Options:
R&S CMW-KM012
FETCh:TDSCdma:MEAS<i>:MEValuation:LIST:MODulation:PCDE:CURRent?
FETCh:TDSCdma:MEAS<i>:MEValuation:LIST:MODulation:PCDE:AVERage?
FETCh:TDSCdma:MEAS<i>:MEValuation:LIST:MODulation:PCDE:MAXimum?
FETCh:TDSCdma:MEAS<i>:MEValuation:LIST:MODulation:PCDE:SDEViation?
Return current, average, maximum or standard deviation peak code domain error results
for all measured list mode segments. For each measured segment two values are
returned:
<Reliability>, {<PCDError>, <PCDECode>}
seg 1
, {<PCDError>, <PCDECode>}
seg 2
, ...
Return values:
<Reliability>
<PCDError>
Peak code domain error
Range:
-60 dB to 0 dB
Default unit: dB
<PCDECode>
Number of the code channel where the PCDE occurred
For AVERage and SDEViation commands NAV is returned (no
result)
Range:
0 to 15
Example:
See
Usage:
Query only
Multi Evaluation Measurement Commands
