Command Reference
R&S
®
CMW-KM750/-KM751
126
User Manual 1173.9670.02 ─ 05
FETCh:TDSCdma:MEAS<i>:MEValuation:LIST:SEGMent<Segno>:MODulation:
AVERage?
FETCh:TDSCdma:MEAS<i>:MEValuation:LIST:SEGMent<Segno>:MODulation:
SDEViation?
Return average and standard deviation modulation single value results for segment
<Segno> in list mode.
Suffix:
<Segno>
.
1..500
Return values:
<1_Reliability>
In list mode, a zero reliability indicator indicates that the results in
all measured segments are valid. A non-zero value indicates that
an error occurred in at least one of the measured segments.
<2_SegReliability>
Reliability indicator for the segment. The meaning of the returned
values is the same as for the common reliability indicator, see
previous parameter.
<3_EVMRMS>
<4_EVMPeak>
Error vector magnitude RMS and peak value
Range:
0 % to 100 %
Default unit: %
<5_MagErrRMS>
<6_MagErrPeak>
Magnitude error RMS and peak value
Range:
0 % to 100 %
Default unit: %
<7_PhaseErrRMS>
<8_PhaseErrPeak>
Phase error RMS and peak value
Range:
0 deg to 180 deg
Default unit: deg
<9_IQOriginOffset>
I/Q origin offset
Range:
-100 dB to 0 dB
Default unit: dB
<10_IQImbalance>
I/Q imbalance
Range:
-100 dB to 0 dB
Default unit: dB
<11_TransTimeErr> Transmit time error
Range:
-500 chips to 500 chips
Default unit: chips
<12_CarrFreqError> Carrier frequency error
Range:
-5000 Hz to 5000 Hz
Default unit: Hz
<13_UEpower>
User equipment power
Range:
-100 dBm to 35 dBm
Default unit: dBm
Multi Evaluation Measurement Commands
