Command Reference
R&S
®
CMW-KM750/-KM751
119
User Manual 1173.9670.02 ─ 05
....................................120
................................120
.............................120
FETCh:TDSCdma:MEAS<i>:MEValuation:MODulation:MAXimum?
READ:TDSCdma:MEAS<i>:MEValuation:MODulation:MAXimum?
CALCulate:TDSCdma:MEAS<i>:MEValuation:MODulation:MAXimum?
FETCh:TDSCdma:MEAS<i>:MEValuation:MODulation:CURRent?
READ:TDSCdma:MEAS<i>:MEValuation:MODulation:CURRent?
CALCulate:TDSCdma:MEAS<i>:MEValuation:MODulation:CURRent?
Return the current and maximum modulation single value results.
The values described below are returned by
FETCh
and
READ
commands.
CALCulate
commands return limit check results instead, one value for each result listed below.
The number to the left of each result parameter is provided for easy identification of the
parameter position within the result array.
Return values:
<1_Reliability>
<2_EVMRMS>
<3_EVMPeak>
Error vector magnitude RMS and peak value
Range:
0 % to 100 %
Default unit: %
<4_MagErrRMS>
Magnitude error RMS value
Range:
0 % to 100 %
Default unit: %
<5_MagErrPeak>
Magnitude error peak value
Range:
-100 % to 100 %
Default unit: %
<6_PhaseErrRMS>
Phase error RMS value
Range:
0 deg to 180 deg
Default unit: deg
<7_PhaseErrPeak>
Phase error peak value
Range:
-180 deg to 180 deg
Default unit: deg
<8_IQOriginOffset>
I/Q origin offset
Range:
-100 dB to 0 dB
Default unit: dB
<9_IQImbalance>
I/Q imbalance
Range:
-100 dB to 0 dB
Default unit: dB
<10_TransTimeErr> Transmit time error
Range:
-500 chips to 500 chips
Default unit: chips
Multi Evaluation Measurement Commands
