manualshive.com logo in svg

Rohde & Schwarz CMW-KE100, User Manual

Share
Download
Rohde & Schwarz CMW-KE100 User Manual Download Page 490

CDMA2000 Signaling

R&S

®

CMW-KM8xx/-KS8xx

490

User Manual 1173.9511.02 ─ 12

Text

Invalid SMS configuration

No SMS file loaded

No error

4.2.15.5

Receive Method

A message can be received while the R&S

 

CMW is in "Registered" or in "Connected"

state. Receiving messages happens without any interaction of the user.

The R&S

 

CMW supports three different options to receive messages

●

Traffic Channel (TCH)

When a call is already connected the message will be transported on the open
Traffic Channel.

●

Access Channel (ACC)

When an MS is in registered state, it is possible to transport messages using the
Access Channel, without connecting a call.

●

Service Option x

When an MS is in registered state, the MS tries to connect a call using a supported
service option. Which service option is used is decided by the MS. After the
R&S

 

CMW received the message, the call is disconnected.

This leads to a temporary "Connection" state of the R&S

 

CMW during the reception

of the message.

Information about the received SMS and how the SMS was transmitted is displayed for
the last message at "MS Info > Messaging (SMS) Info > Last Received Message" or
can be reviewed by selecting it, see 

"Received Messages > Select File..."

on page 560.

The other DBM messages (other than SMS) can be read via the com-
mands 

...:RECeive:READ?

.

The messages are stored in the default directory

D:\Rohde-Schwarz\CMW\Data\sms\CDMA2000\Received

. The SMS file name

has following structure: 

rx<nnnnnn>.sms

 with 

<nnnnnnn>

 is a 6 digit number with

leading zeros to support sorting by name.

The R&S

 

CMW saves up to 100 files in its directory. Afterwards it will delete the oldest

file in directory and save the new received message with the released number. I.e.
R&S

 

CMW receives SMS number 101. Since the oldest file in the directory is SMS

number 1 

rx000001.sms

 the CMW deletes it and saves the new received file with the

name 

rx000001.sms

.

At R&S

 

CMW startup all files in the receive directory are deleted and the message file

counter is reset to 1.

 

General Description

深圳德标仪器 

135-1095-0799

Summary of Contents for CMW-KE100











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands