manualshive.com logo in svg

Rohde & Schwarz Cable Rider ZPH, User Manual

Share
Download
Rohde & Schwarz Cable Rider ZPH User Manual Download Page 72

Basic Operation

R&S

®

Cable Rider ZPH

37

User Manual 1321.0950.02 ─ 03

Selecting the language

The R&S Cable Rider ZPH supports several languages for the user interface.

The following is a list of languages that the instrument supports:

English

Spanish

Japanese

Russian

French

Italian

Chinese

Hungarian

German

Portuguese

Korean

Traditional Chinese

1. In the "Instrument Setup" dialog box, select the "Language" item.

A drop-down menu opens to select the language.

2. Select one of the languages from the drop-down menu.

3. Reboot the device to activate the choice of selected language.

Setting the date format

The R&S Cable Rider ZPH provides two different formats to display the date.

1. In the "Instrument Setup" dialog box, select the "Date Format" item.

A drop- down menu opens to select the date format.

Configuring the R&S Cable Rider ZPH

Summary of Contents for Cable Rider ZPH



























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands