Rohde & Schwarz AREG100A, User Manual, Page: 238 / 321

Remote Control Commands
R&S
®
AREG100A
238 User Manual 1178.7417.02 ─ 04
This is a password-protected function. Unlock the protection level 1 to access it.
Parameters:
<Year> integer
<Month> integer
Range:
1 to 12
<Day> integer
Range:
1 to 31
Example:
:SYSTem:DATE?
// 2016,05,01
Manual operation: See "Date" on page 271
:SYSTem:NTP:HOSTname <NTPName>
Sets the address of the NTP server. You can enter the IP address, or the hostname of
the time server, or even set up an own vendor zone. See the Internet for more informa-
tion on NTP.
Parameters:
<NTPName> string
Manual operation: See "NTP Address" on page 271
:SYSTem:NTP:STATe <UseNtpState>
Activates clock synchronization via NTP.
Parameters:
<UseNtpState> 0 | 1 | OFF | ON
*RST:
n.a. (factory preset: 0)
Example:
SYSTem:NTP:STATe 1
Manual operation: See "Use Time from NTP Server" on page 271
:SYSTem:TIME <Hour>, <Minute>, <Second>
Queries or sets the time for the instrument-internal clock.
This is a password-protected function. Unlock the protection level 1 to access it.
Parameters:
<Hour> integer
Range:
0 to 23
<Minute> integer
Range:
0 to 59
<Second> integer
Range:
0 to 59
SYSTem Subsystem