Rohde & Schwarz AREG100A, User Manual, Page: 115 / 321

General Instrument Functions
R&S
®
AREG100A
115 User Manual 1178.7417.02 ─ 04
See also Chapter 7.4.4, "Password Management" , on page 123.
●
LAN services secure controlled network access
You can individually lock and unlock the supported LAN interface services, see
Chapter 7.4.3, "Configuring LAN Services" , on page 122.
Remote control via LAN interface requires that the interface is activated, but you
can enable the required services specifically.
●
User interface prevents front panel operation and/or reading the display.
For more information, see the document R&S AREG100A Instrument Security Proce-
dures.
7.4.1 Protection Level Settings
Access:
► Select "System Config > Setup > Security > Protection".
The "Protection" dialog provides access to the unlocking of different protection lev-
els.
Several functions in the instrument are password-protected to prevent for example
accidental changes,
"Protection" on page 114.
The remote commands required to unlock a protected stage are described in Chap-
ter 9.10, "SYSTem Subsystem" , on page 218.
Protection Level/Password
Unlocks the selected level of protection, if you enter the correct password.
The default protection level 1 password is 123456.
To lock the protection level again, clear the checkbox.
Remote command:
:SYSTem:PROTect<ch>[:STATe]
on page 225
Using the Security Settings