General Instrument Functions
R&S
®
AREG100A
105
User Manual 1178.7417.02 ─ 04
7.1.3
How to Set the Initial Instrument Settings
This section describes how to set up the R&S
AREG100A initially.
7.1.3.1
Setting the Keyboard Language
You can select the language of the external keyboard connected to the instrument.
To adjust the keyboard settings
1. Press the [Setup] key.
2. Select "User Interface > Keyboard".
3. Select the "Layout".
The dialog closes and the changes take effect immediately.
7.1.3.2
Setting the Screen Saver
You can enable a screen saver that automatically turns off the display after a user-
defined period of time. The screen saver is activated if no settings are made on the
touch screen, or via keys or the rotary knob during the selected wait time.
To activate the screen saver
1. Press the [Setup] key.
2. Select "User Interface > Display"
3. Activate the "Screen Saver".
4. Define the "Wait Time" in minutes.
The instrument turns off the display after the defined period of time.
5. To reactivate the display, tap the screen or press any key on the front panel.
To deactivate the screen saver
1. Press the [Setup] key.
2. Select "User Interface > Display"
3. Disable the "Screen Saver" state.
Customizing the User Interface