R&S AM300
Arbitrary and Function Generator
Operating manual, 02/2005
6-93
E-1007.9922.12
6.2.1.3.8
Setting the ARBITRARY Waveform
Note
Before selecting the
Arbitrary
waveform you need to load a user-defined
waveform ( 6-169). Otherwise you receive the message "Please load a
Waveform into Chx".
Application
You can set the following amplitude parameters for the
Arbitrary
waveform.
Selecting
the AMPT
submenu
1.
Select the
Arbitrary
waveform ( 6-72).
2.
In the
menu
press the
function key
.
The submenu is opened and the function keys [13] are assigned the
appropriate function.
Exit submenu
Set scaling
( 6-94)
Set DC component
( 6-81)
Set upper limit for output voltage
( 6-83)
Set lower limit for output voltage
( 6-83)
UPPER LIMIT
LOWER LIMIT
DC OFFSET
SCALING
Summary of Contents for AM 300
Page 2: ...02 2005 ...
