Rohde & Schwarz 6144.7800.02, Operating Manual

Page: 130 / 189

RSSI Output Characteristic R&S EU4200C
3.87 6174.8456.02-01
User defined
The “User defined” configuration allows configuring the output characteristic
of the RSSI indication within the following parameters:
 Offset of the output level (RSSI Output Curve Offset)
 Slope of the output level (RSSI Output Curve Slope)
 Minimum output level (RSSI Output Minimum Voltage)
 Maximum output level (RSSI Output Maximum Voltage)
Fig. 3.75 RSSI output type
−
User defined.
3.9.2 Configuration
Setting using
the R&S ZS 4200
Use the Service and Maintenance Tool R&S ZS 4200 to configure the RSSI
output pin characteristic of the radio.
1.
Set the “RSSI Output” parameter to “R&S Standard” or “User defined”
on the radio to select the RSSI Output Type.
User defined setting
After selecting the RSSI Output Type “User defined” you can configure the
output characteristic of the RSSI indication.
2.
Set the offset of the output level via the “RSSI Output Curve Offset”
parameter.
3.
Set the slope of the output level via the “RSSI Output Curve Slope”
parameter.
4.
Set the minimum output level via the “RSSI Output Minimum Voltage”
parameter.
5.
Set the maximum output level via the “RSSI Output Maximum Voltage”
parameter.
Note:
The operation of the Service and Maintenance Tool R&S ZS 4200 is
described in detail in the corresponding operating manual.